气膜约束对轴系固有频率影响的试验

对10kg转子进行自由状态和有气膜约束两种状态下的试验模态分析,试验结果给出了转子平动、锥动和一阶弯曲时的固有频率及其振型等模态参数,分析了轴承供气压力变化对轴系固有频率的影响.进行了轴系升降速试验,结果表明:气膜约束下的模态分析结果比自由状态下的更接近于升降速试验的结果.试验结果为气体轴系固有频率的确定以及控制参数的选取提供了依据,也为下一步轴系振动控制奠定了基础.      

跨声速压气机转子失速过程的实验

针对一台跨声速压气机转子在不同转速下的失速过程进行了稳态和动态实验研究.通过对原始信号、小波分析结果以及FFT(fast Fourier transform)变换结果的分析得到,该压气机转子在3个不同转速时均为突跃型全叶高失速,流场中存在一个失速团,失速团沿周向的传播方向与转子转动方向相同,其相对静止坐标系的量纲一转速随转子转速的增大而减小,对这一规律产生的原因进行了分析.      

FGH97缺口试样基于黏塑性本构的弹塑性响应分析

针对缺口试样在高温条件下局部区域应力应变难于测量的问题,基于光滑试样材料力学性能试验,优化得到550℃粉末高温合金FGH97的Chaboche黏塑性统一本构方程参数,并将其应用到FGH97缺口试样单调拉伸及循环加载弹塑性有限元分析中.研究结果表明:①缺口局部区域进入塑性后其应力分布与弹性条件明显不同,随应力增大,最大应力位置向内移动;②在循环载荷条件下,随着循环数的增加,缺口平分线上应力/应变范围变化不大,缺口根部塑性区域出现明显平均应力松弛,并逐渐趋于稳定,导致缺口根部循环载荷比不同于外部施加载荷;③缺口根部塑性区域逐渐增大,但增大的幅度逐渐降低.该研究可为进一步分析缺口构件疲劳寿命影响因素提供支持.      

Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System

Three degrees of freedom (3-DOF) Helmholtz resonator which consists of three cylindrical necks and cavities connected in series (neck-cavity-neck-cavity-neck-cavity) is suitable to reduce flow pulsation in hydraulic system. A novel lumped parameter model (LPM) of 3-DOF Helmholtz resonator in hydraulic system is developed which considers the viscous friction loss of hydraulic fluid in the necks. Applying the Newton’s second law of motion to the equivalent mechanical model of the resonator, closed-form expression of transmission loss and resonance frequency is presented. Based on the LPM, an optimal design method which employs rotate vector optimization method (RVOM) is proposed. The purpose of the optimal design is to search the resonator’s unknown parameters so that its resonance frequencies can coincide with the pump-induced flow pulsation harmonics respectively. The optimal design method is realized to design 3-DOF Helmholtz resonator for a certain type of aviation piston pump hydraulic system. The optimization result shows the feasibility of this method, and the simulation under optimum parameters reveals that the LPM can get the same precision as transfer matrix method (TMM).     

综合模块化航空电子系统节能分层调度的设计(英文)

近年来,综合模块化航空电子(Integrated Modular Avionics,IMA)构架逐渐流行,并通过引入资源分区的概念取代了传统的联合式系统构架。研究了IMA构架下分层调度的设计问题。调度模型通过强时间分区,使多个强实时应用方便地集成在一个单处理器平台。推导出分区周期、分区系数以及可调度性在实时条件下的数学关系,并提出了分区参数的优化算法。考虑具有任意时限的实时任务模型,提高了算法的通用性。在分层调度的基础上,通过有效利用松弛时间,提出一种能量优化方法,进一步减少了飞行器上嵌入式系统的能耗。实验结果表明,本文提出的系统设计方法在保证硬实时需求的基础上,有效的降低能耗达 14%。     

A Scalable Infrastructure for Online Performance Analysis on CFD Application

The fast-growing demand of computational fluid dynamics(CFD) application for computing resources stimulates the development of high performance computing(HPC) and meanwhile raises new requirements for the technology of parallel application performance monitor and analysis.In response to large-scale and long-time running for the application of CFD,online and scalable performance analysis technology is required to optimize the parallel programs as well as to improve their operational efficiency.As a result,this research implements a scalable infrastructure for online performance analysis on CFD application with homogeneous or heterogeneous system.The infrastructure is part of the parallel application performance monitor and analysis system(PAPMAS) and is composed of two modules which are scalable data transmission module and data storage module.The paper analyzes and elaborates this infrastructure in detail with respect to its design and implementation.Furthermore,some experiments are carried out to verify the rationality and high efficiency of this infrastructure that could be adopted to meet the practical needs.     

Sensitivity Analysis for Safety Design Verification of General Aviation Reciprocating Aircraft Engine

This paper presents an application of global sensitivity analysis for system safety analysis of reciprocating aircraft engine. Compared with local sensitivity analysis results, global sensitivity analysis could provide more information on parameter interactions, which are significant in complex system safety analysis. First, a deterministic aviation reciprocating engine thermodynamics model is developed and parameters of interest are defined as random variables. Then, samples are generated by Monte Carlo method for the parameters used in engine model on the basis of definition of factor distribution. Eventually, results from engine model are generated and importance indices are calculated. Based on the analysis results, design is improved to satisfy the airworthiness requirements. The results reveal that by using global sensitivity analysis, the parameters could be ranked with respect to their importance, including first order indices and total sensitivity indices. By reducing the uncertainty of parameters and adjusting the range of inputs, safety criteria would be satisfied.     

水平槽道内气固两相湍流中颗粒行为的PIV实验研究

运用PIV技术对充分发展的水平槽道内稀疏湍流两相流中的颗粒行为进行了定量研究。实验中壁面雷诺数Rer=430,使用颗粒为直径60μm的聚乙烯微珠,测量了0．1％和0．5％两种质量荷载。研究发现,颗粒最大浓度出现在y＋≈10的位置上。对两种质量荷载,下壁面附近的颗粒体积分数最大值均远小于10^3量级,仍属于稀疏两相流。槽道下壁面附近,向上运动的颗粒概率大于向下运动的颗粒,两者概率的差异随着法向距离的增大而减小。在y’=10～30的范围内,颗粒相“喷射”事件（Q2）和“下扫”事件（Q4）概率分别显著地大于和小于当地流体对应值。颗粒相主要通过促进Q2且抑制Q4来实现对流体湍流的影响,颗粒的这一作用随着法向距离的增加而逐渐减弱。     

固体火箭发动机碳基材料喷管热化学烧蚀特性

为了准确预示固体火箭发动机碳基材料喷管的烧蚀率,依据热化学烧蚀理论,建立了喷管传热烧蚀的二维轴对称气-固-热耦合计算模型,计算通过FLUENT壁面化学反应模型完成,无需事先假设烧蚀控制机制。针对70-lb BATES发动机喷管进行了烧蚀计算,研究了推进剂配方、氧化性组分、燃烧室压强对喷管烧蚀的影响。结果表明:烧蚀率计算值与试验测试值吻合较好;烧蚀率分布遵循喷管内壁热流密度分布规律,在喉部上游入口处达到峰值;烧蚀率随推进剂Al含量增加而降低,随燃烧室压强升高而近似正比例增大;H2O是决定烧蚀的主要氧化性组分。     

脉冲发动机中隔层传热炭化模型

为分析脉冲发动机中隔层的绝热效果及温度变化情况,推导了隔层两种炭化模型的计算公式,对比实际发动机试车结果,模型一误差为20%,模型二误差为6.7%,炭化模型二具有较好的精度;数值模拟了隔层的热传导过程,将是否考虑炭化影响的隔层传热深度及温度分布与理论计算结果进行对比,未考虑炭化影响计算结果的误差在14.3%以上,考虑炭化影响计算结果的误差均小于10%。研究结果表明,预估隔层炭化深度时,应该运用炭化模型二;计算隔层的温度场分布时,必须考虑炭化影响。